Flux Pumps F430 Barrel Pump for Concentrated Acids

Note: Price information will be shown when you select your option.

Heavy duty PVDF / FKM drum pump with mechanical seal, hastelloy C driveshaft

Continuous duty F458 IP55 totally enclosed motor, 230V 50 Hz 460W
2m DN19 chemical hose with PVDF / FKM hand nozzle and compression gland (G2″ male)
Alternative FFKM o-rings, 110V motors and compressed air motors available on request

Description

The ultimate PVDF drum pump

Fitted with ETFE axial (high flow) impeller
Max open flow 170 LPM @ zero back pressure, max discharge pressure 1 Bar (based on water)
5 x brass shaft support bearings on 1000 mm pump, 6 x on 1200 mm pump
Class-leading 6 mm diameter hastelloy driveshaft for maximum service life
Top-pull inner tube assembly can be removed in seconds for cleaning or maintenance
Fitted with mechanical seal with FKM o-ring, for handling pure, abrasive and crystallizing liquids.
Suitable for liquids containing small solid particles
Minimal cross-contamination when transferring between different fluids
Serviceable design with all parts available to buy as spares
Suitable for max liquid temp 80 deg C, max density 1.5 and max viscosity approx 700 mPas
Not suitable for extended dry running (see F424)
Heavy duty PVDF / FKM drum pump with mechanical seal
Continuous duty F458 IP55 totally enclosed motor, 230V 50 Hz 460W
2 m DN19 chemical hose with PVDF / FKM hand nozzle and compression gland (G2″ male)
Alternative FFKM o-rings, 110V motors and compressed air motors available on request
Supplied with UK 3-pin plug adaptor